AutoPage C3-RS730 LCD Car Alarm with Remote Start (4 Channel) Paging Remote

AutoPage C3-RS730 LCD Car Alarm with Remote Start (4 Channel) Paging Remote

4-Channel Alarm with Remote Car Starter and Two Way AM/AM Paging LCD Remote Transmitter

Note: For many 1998 and up vehicles, a bypass module is required for the remote start feature

The AutoPage C3-RS730 LCD car alarm with remote start has 5 on board relays that can be used for parking lights, starter, accessories, ignition 1&2 and one additional relay/socket for starter disable.

Autopage C3-RS730 LCD Features:

• New chrome metal finish with smart looking leather strap for key ring
• New LCD screen with 50% more viewing space and 7 color selectable backlighting
• Two way paging transciever uses AM frequency bands for transmitting and receiving at 433.9 megahertz.
• LCD unit includes 24-hour clock with meter minder and temperature indicator and countdown run timer.
• New EMS-1 mini-size dual stage shock sensor
• New two-way window mounted super entended range helical transceiver antenna module
• New on-board serial port for i-Data link
• 5 Button XT-33 standard 433.9 Mhz remote transmitter
• New programmable outputs, plus new starter and ignition timing sequence for improved capability with 2007+ vehicles (specifically GM)
• New onboard temperature indicator for identifying in-cabin temperature from LCD remote
• 50% smaller size fits in tight spaces under the dash of newer cars and trucks

5 On-Board Relays:

• 3rd Ignition (-) output
• Parking Light
• Accessory
• Starter
• Ignition 2
• Ignition 1

Remote starter features:

• Ground when start (-) output
• Selectable one or two push Safety Start
• Programmable gasoline or diesel with 10, 15, or 20 second Wait-to-Start
• Hood pin switch safety input (pin switch included)
• Selectable RPM / Voltage Start
• RPM / Voltage / Hi-Low level check
• Timer control start option
• Sensor control output during start
• Temporary Stop Feature
• Factory Alarm Disarm and Rearm signal output
• Programmable factory keyless door locking before and after start
• Programmable start status output with shock sensor bypass
• 45 second door / dome light bypass after ignition is turned off.
• Programmable Ignition 2 (on / off)
• Programmable 3 hour timer start
• Programmable 1 / 3 hour timer start
• Selectable Run Timer (5/10/20/30 minutes)
• Ignition control by-pass during remote start
• Selectable Gasoline / diesel
• Selectable Diesel warm-up time
• Programmable Ignition control locks bypass (on / off)